Dri-Dek Self-Draining Interlocking Surface

Never worry about wet floors again. No more puddles. No more wet floors. No more germs. Now there’s Dri-Dek, the self-draining floor system. The perfect solution for showers, saunas, pool decks, dressing areas, locker rooms or any place that gets wet. Why? Because Dri-Dek’s textured surface not only drains water, its patented design lifts you above wet floors too. Available in twelve designer colors, you can match any decor. Anywhere. Any time. Dri-Dek kills germs, mold and mildew. It’s a snap to install Dri-Dek. The Tiles, Sheets and Rolls interlock to form a surface of any size or shape.

Available in interlocking 1’ x 1’ Tiles, 2 x 2 Corners, 2 x 12 Edges, 3’ x 4' Sheets and 3’ x 12’ Rolls. All sizes are available in twelve colors to compliment any application. Made exclusively from tough durable oxy-B1 vinyl. All Dri-Dek is 9/16" thick.

The 2” X 12” Edge will attach to all four finished sides of the Tiles, Sheets or Rolls. Where the Edge tabs meet the Tiles tabs, trim the tabs from the Edge to attach the Edges. Where Edges end tabs meet Edge end Tabs, remove one of the tabs so the Edges can be snapped together. Where Edge tabs meet tile pins, just snap on the Edges. Corners will snap into the end of the Edges using the tabs on the end of the Edge. You may tap the Corners and edges with a hammer to securely seat the pins into the tabs.
EACH (1)

 

Features

Features

·  Provides a dry, shock absorbing cushion over decks.

·  It shields your truck beds from nicks, scrapes, dents and scratches

·  Anti-skid surface prevents equipment from sliding

·  Stands up to oils, acids, grease and solvents, or the manufacturer will replace any returned product free of charge

·  Air is allowed to circulate underneath for rapid drying

·  The sub-surface leg design holds Dri-Dek in place

·  12 colors to pick from

·  Any way you cover it, your rig looks professional

·  The units snap together to form a portable surface of any length or width.

·  Dri-Dek can be easily trimmed to fit around controls, winch mounts, or rear-end compartments

Additional Info

Additional Info

Material:
Oxy-B1 Vinyl

Weight:
14.5oz. per Dri-Dek 12”x12”x9/16” Tile.

Additives:
Oxy-B1, Ultraviolet Stabilizers

Weather Resistance:
96% retention of Elongation
107% retention of 100% Modulus
98% retention of Tensile Strength
99% retention of Color (Weatherometer @ 720 hours)
Elongation: 348%

Temperature Range:
Designed for continuous environments from -30° F and not exceeding 167° F (ASTM D 746)

Chemical Resistance:
Resistant at ambient temperature to inorganic acids, oils, grease, detergents, brine and organic solvents except Methyl Ethyl Ketone (MEK), Tetra Hydro Furan (THF), Demethyl Formamide (DMF), Methyl Iso Butyl Ketone (MIBK) and Phosphate Ester. Dri-Dek will withstand < 50% Nitric Acid concentration.

Flammability:
Flame resistant. Passed Vertical Flame Test UL 94V-O

Specifications

Specifications

Tensile Strength:
2750 PSI (ASTM D 412)

Dielectric Strength:
500volts/Mil (ASTM D 149) (non-conductive)

Insulation Resistance:
1000 Megaohms/1000ft. (UL 82-106)

Volume Resistivity:
1 x 10” ohm-cm (ASTM 257057T)

To top